In evidenza

altair-wbs-202-1

Altair WBS 202

Altair WBS 202Altair WBS 202Altair WBS 202

WBS-202 Digital Wireless Intercom is made up of a base station that operates with the single channel wireless beltpacks WBP-200 and WBP210 as well as with the dual channel manager beltpacks WBP-202 and WBP-212.

This wireless base station doubles the capacity of the single channel WBS-200 maintaining full beltpack compatibility.
The unit features a complete double channel radio link with a capacity of up to 4 independent beltpacks per block.

By using a singleswitch button, the unit is set up in single channel configuration allowing all 8 beltpacks to share the same channel party line
conversation keeping their dual channel wired intercom capabilities.

The WBS-202 system includes a new dual channel manager beltpack WBP-202 in compact lightweight case or the extreme WBP-210 in a rugged case, providing production managers with great versatility to follow simultaneous operation into two separate crews and broadcast direct messages to the PA equipment. The base can operate with a maximum of two units, one per block.

The base unit can operate in isolated Master mode or connected in Slave mode to another wireless bases enabling creation of a large
wireless system.
Two separated A/B party line output connectors are included to drive standard EM-201 wired beltpacks or another compatible 2 or 4 wire intercom elements.

Altair
  • Power requirements: 90-264 VAC/50-60 Hz/ 50 VA.
  • RF: Frequency band 1900 MHz, depending on country.
  • Number of beltpacks per base: 1 to 8 units.
  • Connections: 2x Intercom Line, PRG in, PA out, SA, external powered loudspeaker, dynamic or electret headset.
  • Remote functions: Mic kill, Buzzer kill, Stage announcements.
  • Dimensions and Weight: 1U x 19″ x210 mm 3.2 Kg net.
Type: Power amplifier
Output Power: Rated: 480W RMS
(Impedance/Sensitivity) INPUT 1 600! /2.8 mV (-31 ±2 dBV) unbalanced w/ P. Power
(Max. input level): INPUT 1 3.98V / +14 dBu
(Connection type): INPUT 1 XLR 3 pin / Jack 1/4”
Outputs LINK Line level – 20 k! / 1V (2.21 dBu) balanced
POWERED Low Impedance (4/8!) + Voltage Line (70/100V)
THD + N Less than 1% at 1 kHz, rated power
Frequency Response: INPUT 1 50 Hz – 20 kHz ±3 dB
S/N Ratio: INPUT 1 > 90 dB
Tone Controls Bass ±12 dB/ 20 Hz – 80 Hz / Centre freq. 30 Hz
Middle ±12 dB/ 350 Hz – 2 kHz / Centre freq. 800 Hz
Treble ±12 dB/ 6k3 Hz – 20 kHz / Centre freq. 16 kHz
Power Supply: AC 115/230V, 50/60 Hz ±10%
Consumption: 1100W
Static power consumption: 20W
Dimensions: 483 x 88 x 490 mm (2 HU 19” rack)
Weight: 20 kg
 
 

Contattaci subito per informazioni o richieste